Support Forums
VTScada Server Using Two IPs

How do i make the VTScada server only use my one IP address not both NIC's

How do i make the VTScada server only use my one IP address not both NIC's

https://www.vtscada.com/help/Content/p_Properties/varSetupRPCManagerAllowIP.htm?tocpath=Reference%7CProperty%20Reference%7CSystem%20Properties%20-%20Setup.ini%7C_____8

[RPCManager-AllowIP]
IP = x.x.x.x/xx

We use a small subnet for the VTscada replication, so for us the IP=10.8.201.96/27

https://www.vtscada.com/help/Content/p_Properties/varSetupRPCManagerAllowIP.htm?tocpath=Reference%7CProperty%20Reference%7CSystem%20Properties%20-%20Setup.ini%7C_____8 [RPCManager-AllowIP] IP = x.x.x.x/xx We use a small subnet for the VTscada replication, so for us the IP=10.8.201.96/27
43
1
1
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Cancel
Delete
Pending draft ... Click to resume editing
Discard draft