Support Forums
Productivity 1000 device driver

Is there a specific driver for the P1-540 I can use like the one used by the C-more HMI's (AutomationDirect Productivity Ethernet)? Or do I just use the generic Modbus TCP/IP?

Is there a specific driver for the P1-540 I can use like the one used by the C-more HMI's (AutomationDirect Productivity Ethernet)? Or do I just use the generic Modbus TCP/IP?

Based on this document: https://cdn.automationdirect.com/static/specs/cutsheet/P1-540_cutsheet.pdf

It appears that VTScada should be able to communicate with that device using any of the following drivers:

-Modbus TCP
-Modbus RTU
-MQTT

Based on this document: https://cdn.automationdirect.com/static/specs/cutsheet/P1-540_cutsheet.pdf It appears that VTScada should be able to communicate with that device using any of the following drivers: -Modbus TCP -Modbus RTU -MQTT

Trihedral Engineering Ltd.

11
1
2
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Cancel
Delete
Pending draft ... Click to resume editing
Discard draft