General Discussions
displaying a PLC's ASCII text

My PLC contains some ASCII text stored within sequential MODBUS registers. How can this be displayed in VTScada?

I've tried both an "I/O and Calculations" tag with a String data type as well as a Legacy "String I/O" tag. No mater how I set these up numbers are displayed instead of text. Also, there is nowhere to put in the range of Modbus registers which hold the numbers which represent the string's ASCII codes.

My PLC contains some ASCII text stored within sequential MODBUS registers. How can this be displayed in VTScada? I've tried both an "I/O and Calculations" tag with a String data type as well as a Legacy "String I/O" tag. No mater how I set these up numbers are displayed instead of text. Also, there is nowhere to put in the range of Modbus registers which hold the numbers which represent the string's ASCII codes.
20
0
1
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft