Support Forums
Omron CJ2H and Ethernet/IP

Hi! I have Omron CJ2H and I've trying connect VTScada to PLC Omron via Rockwell driver as Ethernet/IP protocol, but nothing worked. What am I doing wrong?
VTScada does not support connect to Omron PLC with eth/ip protocol?

I thought it doesnt matter what is the plc I have using, if that have this protocol. I try compactlogix, controllogix, etc. (symbolic adrr.), but nothings happened. Please help.

Hi! I have Omron CJ2H and I've trying connect VTScada to PLC Omron via Rockwell driver as Ethernet/IP protocol, but nothing worked. What am I doing wrong? VTScada does not support connect to Omron PLC with eth/ip protocol? I thought it doesnt matter what is the plc I have using, if that have this protocol. I try compactlogix, controllogix, etc. (symbolic adrr.), but nothings happened. Please help.

I'm sure that won't work - why are you using the rockwell driver...?
Try reading the the below about the Omron driver, or use Modbus.
https://www.vtscada.com/help/Content/D_Tags/D_OmronFINSDriver.htm?tocpath=Reference%7CTag%20Reference%7CCommunication%20Driver%20Tags%7COmron%20FINS%20Driver%7C_____0

I'm sure that won't work - why are you using the rockwell driver...? Try reading the the below about the Omron driver, or use Modbus. https://www.vtscada.com/help/Content/D_Tags/D_OmronFINSDriver.htm?tocpath=Reference%7CTag%20Reference%7CCommunication%20Driver%20Tags%7COmron%20FINS%20Driver%7C_____0
16
1
2
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Cancel
Delete
Pending draft ... Click to resume editing
Discard draft