Support Forums
VTScada Alarm Acknowledge + PLC Ack command with one button

Is there a way to make a Alarm Acknowledge button that will Ack all the alarms in VTScada and send the Ack command to the PLC?

Currently we have layered the PLC Ack command button (momentary button) behind the build-in Acknowlegde All button, and we need to press it twice to Ack alarms in VTScada and in the PLC. Looking for a way to combine it in one button.

Is there a way to make a Alarm Acknowledge button that will Ack all the alarms in VTScada and send the Ack command to the PLC? Currently we have layered the PLC Ack command button (momentary button) behind the build-in Acknowlegde All button, and we need to press it twice to Ack alarms in VTScada and in the PLC. Looking for a way to combine it in one button.

I'd suggest you look at the PLC Alarm tag for your use case.

I'd suggest you look at the PLC Alarm tag for your use case.

Trihedral Engineering Ltd.

Yes but it requires an Alarm List tag, a Calculation tag, and a Digital Out tag and a clever expression.

Yes but it requires an Alarm List tag, a Calculation tag, and a Digital Out tag and a clever expression.

Or if you could group buttons together so they don't act independently.

Or if you could group buttons together so they don't act independently.
112
3
4
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft