Support Forums
CIP Connection to ControlLogix

I am having an issue connecting to a ControlLogix PLC. See attached pictures about the backplane configuration and the current error on VTS. Any ideas? I can provide any further information as needed.

Lastly, using a C-More touchscreen, and I can access the main CPU through 10.133.64.31, backplane port 0, easily.

5d44a52c8389c

5d44a52c82c58

5d44ad8e539c3

I am having an issue connecting to a ControlLogix PLC. See attached pictures about the backplane configuration and the current error on VTS. Any ideas? I can provide any further information as needed. Lastly, using a C-More touchscreen, and I can access the main CPU through 10.133.64.31, backplane port 0, easily. ![5d44a52c8389c](serve/attachment&path=5d44a52c8389c) ![5d44a52c82c58](serve/attachment&path=5d44a52c82c58) ![5d44ad8e539c3](serve/attachment&path=5d44ad8e539c3)

In some cases '[]' (without the quotes) is wanted for the port segment path. Also, if not already done, you may want to try plugging the network cable into the front RJ45 port.

In some cases '[]' (without the quotes) is wanted for the port segment path. Also, if not already done, you may want to try plugging the network cable into the front RJ45 port.

Trihedral Engineering Ltd.

30
2
3
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft