Support Forums
AB DF1 Communication

I'm just testing some comms on the bench here for a customer. I can set up the DF1 tags fine and get good comms and data when set to TCP/IP, but when I try to switch it over to the serial comms I get an error code 16 Illegal Command or Format. I can see on my SerialPort tag I don't have any errors so it must be something in my DF1 driver tag I'm missing.

Thanks!

I'm just testing some comms on the bench here for a customer. I can set up the DF1 tags fine and get good comms and data when set to TCP/IP, but when I try to switch it over to the serial comms I get an error code 16 Illegal Command or Format. I can see on my SerialPort tag I don't have any errors so it must be something in my DF1 driver tag I'm missing. Thanks!
18
0
1
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Cancel
Delete
Pending draft ... Click to resume editing
Discard draft