Hi,
I'd like to add a vertical scrollbar to my window so I can see the elements outside that window scope. I am able to display the scrollbar using VScrollbar. As I understand, VScrollbar returns a numeric value representing its position.
I tried using WindowOptions to make a vertical translation equal to my scrollbar position to no avail.
Could you tell me how to properly use VScrol
HI,
I'm thinking about changing vehicles, I currently have a Xsara Picasso Gasoline 90 Cv. I want to buy a C4 Picasso Diesel, I think the one that better fits me is the 110 HP, but I have the doubt between the manual change or the CMP, I have heard some comment, about the latter, and I have doubts. Can somebody help me????
Thanks
I did not find the right solution from the internet.
HI,
The multi instrument software displays most of the signal parameters and also perform the data logging.
We have the enquiry to get some of the parameter values (THD & SNR) in our SCADA.
Is it possible to do the same by any means - say any protocol or via pc communication port we can exchange data ?
Please do let us know , as customer requires some data logging in his SCADA of
We are installing VTSCADA for the first time in our district and will be setting it up on two Windows 2016 Virtual Servers. Is there any documentation I can give our IT contractor for setting up these servers for running the HMI?
Hi, Is there a way to edit the alarm set point for Analog Status Tag without accessing to Tag Browser? I would to set up a Numeric Value Widget for alarm set point on Page in order for user to edit if they are unable to access to Tag Browser. I tried to set up a Linked Tag Widget but unable to select property tag after configuring according to the guide available.
Your help is greatly apprec
I have configured VTScada as a SNMP agent and generated a MIB file from the application. I have followed the SNMP agent configuration according to the following steps:
SNMPAgentEnable Value = 1
SNMPAgentIPListener Value = SNMP IP Listener Tag
Create SNMP Agent Widget on Idea Studio
Generate MIB file
Load MIB file using MIB browser but unable to GET any values
Is there a solution to resolve t
Maxime
posted Feb 1 '18 at 3:59 pm
Hi,
I am new to VTScada and I am testing out the scripting potential of the platform.
I started out by creating a widget that display my typical dataset linked to tags. To display that widget I used the GUITransform function.
Now I obviously don't only have one but many of those that I want to display on the same screen. Also the number will change dynamically so they will h
Hi,
I'd like to use an array of tags and order it by different characteristics in script (ex. the tags with an active alarm first).
I think the best way to achieve this is by using the function GetTagList then sort that array. Unfortunately GetTagList only return an array of tag names so I can't access the tags properties. In order to sort them I would need a function that return a tag p
The latest version of Chrome (64.0.3282.137) on Android (7.0.0) doesn't seem to allow you to logout of the VTS Anywhere client (VTS version 11.2.10). We use to be able to tap our name and the menu would pop up and give you the option to Log Off. Is there a work around to get this working again or is this working in the latest version of VTS.
Glenc
posted Feb 1 '18 at 5:36 pm
I am very new to SCADA we are using the vtsx client to connect to the server. On some of the Windows 10 desktops when the URL to the server is typed in the program automatically adds :80 to the end and will not connect. i.e. the url is http://15.15.15.15 as soon as we hit connect it shows up a http://15.15.15.15:80
The service is running on port 80 on the server.
These computers DO
ICI
posted Jan 11 '18 at 2:22 pm
Missing or damaged file in repository.
Trace Item GUID 7c75a5c9-858a-4e7b-bd34-0e563c453ea0
Timestamp Thu Jan 11, 2018, 09:07:19.714 (Eastern Standard Time)
Application Unknown
Caller System\Repository\Init\GetManifestRev\ReadManifestRecord
User ID
Victor
posted Jan 9 '18 at 7:47 pm
Hi,
In the Programmer's guide document, there is a "A 15-Minute Snapshot Report" section that show you can use the \SnapshotReport function to create a custom Snapshot Report. Is there an equivalent function for total report that also allow custom time frame?
Thanks
Windows 10 update KB4056892 prevents the VTScada Internet Client (VIC) from being launched using the VTSX desktop program on client computers with that update installed. Other VTScada Thin Client formats, including those for all mobile devices, are unaffected (see work arounds below).
Microsoft is aware of this issue (see notes about CoInitializeSecurity at https://support.microsoft.com/en-
jsanden
posted Jan 4 '18 at 9:22 pm
How do you control how often the plot data widget updates? It's fine on the local machine, but the internet clients have a slow connection. The plots show "data retrieval in progress" more often than they show the plot line. I'd like to slow it down specifically on the clients, but would be OK setting it slower on the project if that's the only way.
jsanden
posted Jan 12 '18 at 9:24 pm
I have a client that likes the "arc" gauge widget. I can't figure out the decimal formatting on that one. Some tags display a decimal, while others show a whole number.
Some of the gauges let you specify the number of digits to display after the decimal. How can I set that on the arc gauge? Is there an expression to use?
Are you using VTScada Alarm Notifications while running VTScada as a Windows Service? The ability to run VTScada as a service was introduced in version 11.1. It allows an application to optionally run in the background without an active user interface.
Please note that Microsoft does not permit Windows services to access SAPI, the built-in Windows text-to-speech engine. This means that if y
charris
posted Dec 14 '17 at 2:07 am
Is it possible to add a hyperlink to a webpage in a VTSCADA application?
Thanks!
dougs
posted Nov 10 '17 at 4:34 pm
When you try to do a "Plain Excel XLS File" report, it fails with the error "Unable to generate report. Invalid data source."
You can also get a similar response when you try to use the print wizard on the Historical Data Viewer.
It appears this is being caused by changes to the Microsoft JET drivers in an October update. The new JET drivers can be found here for 2010 -
https://www.mi
Hello.
After an abnormal shutdown of the pc our application don´t run anymore.
The error is Layer GUID not found.
Any opinion?
LaneCAI
posted Dec 1 '17 at 4:18 pm
Is there a way to send unacknowledged alarm status or new alarm status back to the PLC? We need to be able to set a bit in the PLC whenever a new alarm is generated. VTScada Light V11.2
LaneCAI
posted Dec 1 '17 at 5:05 pm
Is there a way to send unacknowledged or new alarm status back to a PLC bit?
I am wondering how I can read data into VTScada from a general RS232 connection given that the data packet format is known.
Is it possible to read a csv file into the VTScada historian? If I had a csv file on a computer that was constantly updating, could this csv file be read by the historian and stored?
Hi, i'm trying to link an OMRON CJ2M PLC to the PC (server) but not sure which of these drivers are to be use. PC is connected to Omron PLC hardware via USB connection, and working fine with CX-Programmer. Help is appreciated !
1) Omron FINS Driver Tags
2) Omron HOST Link Driver Tags
I was just wondering, if I have a numeric entry widget to write a SP to a PLC tag and a momentary PB how could I use the PB to change the value in the numeric entry?
What I was going to do is use the numeric entry widget to write an RPM SP to a vfd and use the momentary PB as a stop button for the motor but when I push the stop button I want the numeric entry value to be 0 instead of the las
phobic
posted Aug 8 '17 at 12:29 pm
Isn't there a way to lock objects, and see which object is on which layer, and lock and turn off layers. And a way to know and decide which object to chose.
I am making Widgets with 5-6 icons on top of each other at several places, opacy turned on by digital inputs, and changes affected by alarms and warnings. It is a nightmare to pick the right object.
Even on a normal page, I keep picki
Hi
I need to integrate Waspmote wireless sensors to an industrial control system.
We have purchased two waspmotes and a meshlium gateway. I have got the data from the waspmotes into the meshlium and can access the database within the meshlium from a MySQL client.
What I need to do is get the data from the meshlium into another piece of software that will run on an industrial HMI. Init
I have created my digital input tags and drew the tags with widgets. However, the logging of the DI tags in the historical viewer is not shown unless I leave the Historical Viewer open. Hence, the DI data before I open the Historical viewer is not logged. As for the analog input tags, the tags are logged autonomously based on real-time values even the Historical Viewer is not open. How can I conf
I have problem connecting the SNMP driver to VTScada as well as importing the MIB file. Is there a way to troubleshoot the driver connection and the error for loading the MIBs under the SNMP address?
My port is valid but my SNMP driver is invalid.
Thanks for the help in advance.
I would dearly love to see retries and consecutive failed polls before alarming.
